sensolus location tags

Location tags

Because screwdrivers, small boxes, and roll cages deserve to be findable too.

Keep tabs on everything, down to the smallest tool. Location tags are simple, affordable, and built to scale. Attach one to any asset, and it shows up on your platform automatically.

  • 3 to 10 years battery life
  • Multiple mounting options
  • Compact form factors
  • IP67 rated
  • Up to 50m BLE range
  • Works with smart gateways & trackers

What are location tags?

A location tag is a small, rugged tag you stick or attach to an asset. Once it’s in place, it quietly broadcasts its location via Bluetooth to nearby smart gateways. No Wi-Fi setup, no wiring, no hassle. Depending on the model, the battery lasts anywhere from 3 to 10 years, so once it’s attached, you can largely forget about it.

A single gateway can pick up tags from up to 50 metres away, and with protection against dust and water, they work just as well in a busy warehouse as on a construction site. The result: full visibility over thousands of smaller assets, at a fraction of the cost of putting a full tracker on each one.

sensolus bluetooth tag tracking principle

Our location tags

Tags for every asset type and environment.

FAQ

How BLE location tags work with smart trackers and smart gateways to pinpoint your assets.

What’s the difference between a location tag and a GPS tracker?

A smart tracker finds its own location (with GPS, Wi-Fi or geobeacons) and sends it to the platform over the mobile network. It works anywhere, so it’s ideal for valuable assets that travel far and wide.

A location tag is much simpler. It’s a small, low-cost tag that sends out a short Bluetooth signal every few seconds, and that’s it. A smart gateway nearby picks up that signal and tells the platform where the asset is. No charging needed: location tags run for 3 to 10 years on a single battery.

So which one do you need? Smart trackers for high-value assets that can end up anywhere. Location tags for large numbers of smaller or lower-value items that move between known places, like your sites, warehouses or customers. Many customers use both. Discover how BLE asset tracking works.

How many location tags can a single smart gateway detect?

A lot. Our ZA 3515 smart gateway keeps track of up to 2,000 location tags at once. Smart trackers that work as a gateway handle fewer, which is plenty for a van full of tagged roll containers. In practice, you rarely run into that limit. The number of gateways you need depends on how many zones you want to tell apart, not on how many location tags you have. Discover our smart gateways.

Can location tags be tracked outdoors?

Yes. Smart gateways are built tough enough for the outdoors, so you can place them on a yard, a depot or an open-air storage zone, and they’ll show which location tags are there. On the road, a smart tracker in your vehicle (like the TRACK 1215) sees which tagged assets are on board, so you know what was picked up and where it was dropped off. Need to follow a single asset anywhere, down to its exact spot? Then a smart tracker is the better fit.

What kind of assets are location tags best for?

Location tags shine when you have lots of assets that keep moving between the same places: roll containers, logistics carts, pallets, load carriers, tools or returnable packaging. Too many to put a smart tracker on each one, but too valuable to lose. Take Ampère, Bol’s logistics partner: it tagged around 8,000 roll containers that travel between its hubs and more than 50,000 sales partners. Now it can see where its containers are, spot the ones sitting unused and put them back to work. Read the Ampère story.

Do my drivers or staff need to scan location tags?

No, it all happens automatically. Location tags send their signal by themselves, and any smart gateway nearby picks it up: a fixed gateway in your warehouse, a smart tracker in your truck, or even the handheld devices your team already uses. At Ampère, drivers’ Zebra scanners pick up the roll containers’ location tags as they make their rounds. No buttons to press, no extra steps. The drivers just do their job, and the platform keeps the overview up to date. See how Ampère does it.

How quickly does tracking with location tags pay off?

Often faster than you’d think. Vaillant’s factory in Nantes started with a small pilot and then tracked its full fleet of 1,600 logistics carts with Bluetooth technology. Within a few months, cart utilisation went up by around 5%. Instead of buying new carts, Vaillant moved underused ones to where they were needed, saving about €30,000 on a single project. The investment paid for itself in just over a year. Read the Vaillant story.

Can I use location tags to keep track of tools?

Absolutely. Specialised tools are expensive, easy to misplace, and a missing one can bring production to a halt. With a location tag on each tool, you can see which zone it’s in, check your inventory without counting by hand, and get an alert when a tool leaves where it should be. Airbus uses Sensolus Bluetooth technology to keep track of specialised tools in its warehouses. When a tool went missing, the team found it within minutes and avoided a production delay. Read the Airbus story.

Want to see us in action?

Ask us anything, from the battery in the tracker to inventory reports & asset journeys.

Request demo