TRACK 1020

GPS/Wi-Fi/BLE - Sigfox RCx

The medium-size long-life battery-powered full-fledged GPS, WIFI and BLE tracker with tamper alert.  Ideal for worldwide asset tracking.


World-wide Sigfox certified with integrated data recovery

Automatic region switching

The tracker performs automatic GNSS or Monarch based region switching.

Full data recovery (patented)

Some areas lack perfect network coverage. Our patented data recovery algorithm will recover this data when the device gets back to an area with sufficient coverage.

Certified for flight

This tracker automatically detects when it is in flight based on acceleration and barometric pressure. When in flight, all communication is switched off. Data recorded during flight is recovered after landing with our data recovery algorithm


Designed for industrial use

Small form factor

The TRACK 1020 is lengthy and slim which makes it perfect for small places.

Physical tamper detection

Get notified when the tracker is removed.

Suitable for rough conditions

IP69 water and dust proof.

Multiple mounting methods

Choose the method which is most convenient: rivets, screws, magnets or tie wraps.

Serves multiple use cases

The trackers are used on a wide array of assets: trailers, containers, RTP, boxes, …


Multi-technology indoor & outdoor localization tailored for low power​

Full variety of localization technology

This tracker allows localization based on GPS, BLE, WiFi or network localization (Sigfox Atlas). The product can be delivered with all localization technologies on board.

Smart decisions when to localize

This tracker can be configured to localize periodically, scheduled, motion or context based.

High precision localization (optional)

Requiring up to 1 meter precision? This tracker is can be configured to automatically switch to high precision with a Quuppa high precision setup. Our platform does the rest.


Smart activity detection for utilization & trip extraction

Activity detection

Based on acceleration the edge analysis capabilities allow to perfectly tune the activity detection patterns for your use case.

Journey/trip detection

The trackers allow extracting journeys of trackers between different locations so that you don’t miss a stop even if it is a short one.


Extract how often and how long your asset has been utilized to optimize your fleet or roll-out pay per use models.

Context sensing

Sense more with embedded or external sensors

Extensible external sensors

Do you need to monitor temperature, humidity, door status or another sensor? This tracker allows to communicate with external sensors over the Bluetooth Low Energy protocol.


Measure if a box is open or closed, if a scissor lift is in use or if a container is emptied with the built-in orientation functions.

Measuring or alert mode

If you need to know immediately when a threshold is exceeded, you can use our edge sensor alerts.

Physical tamper alert

Detect when somebody is removing the tracker with the tamper button on the back of the tracker.

Edge platform

Fully configure the tracker behavior to your asset type and use case

Configurable rule engine

This tracker allows to remotely configure the desired behavior of your tracker in the shape of conditions/actions.

Configurable edge pre-processors

Each asset type and use case has optimal settings for correct analysis. Those extensive set of parameters can be remotely configured.

Extensive diagnostics

Having a lot of trackers in the field requires a solid set of diagnostics to check installation quality, follow-up battery consumption of each separate component and much more.

Over the air firmware update over BLE

Flash new firmware on the tracker using a smart phone or BLE gateway.

Assets & segments


  • Always know where trailers are
  • Follow up usage and mileage
  • Know when a door is opened
  • Monitor transport conditions
  • Monitor persons inside

Returnable Transport Packaging (RTP)

  • Prevent delays in production line
  • Optimize RTP allocation and rotation
  • Know RTP’s in use

Most used applications

Know on every moment where your assets are.

Detect and find back stolen assets.

Optimize asset rotation times & detect flow anomalies.

Monitor important parameters like temperature and humidity during transport.

Detect assets on the wrong place, spending too much time on a location,...

Theft protection

Detect and find back stolen assets.

Sigfox• Energy efficient tranceiver
• Internal omnidirectional antenna
• Bi-directional communication
• All regions: RC1/RC2/RC3/RC4/RC5/RC6
• Dynamic multi-region switching possible
• Data recovery (patented)
Bluetooth Low Energy (BLE)• BLE 2.4 GHz
• Bluetooth Low Energy 5.0
• OTA firmware upgrade
GNSS• u-blox 8th generation GNSS receiver for GPS
• Large patch antenna for optimum performance
BLE• Sensolus proximity beacon detection
• Detectable by zone and high precision anchors
Sigfox AtlasNetwork based geolocalization
Wi-FiWi-Fi based geolocalization (optional)
Internal sensing• Activity monitoring
• Orientation monitoring
• In flight monitoring
• Virtual tamper detection
External sensing• Temperature, humidity, air quality
• Person presence, contact, magnet
• Other BLE sensors can be added
Mounting optionsHoles (top: ∅5 mm, bottom 5*6 mm ) for screws or rivets
Mechanics & design
AntennasAll antennas are internal
Size175x55x28 mm
Weight135 gram
CasingPanel – PBT 30%GF, Cover – PP 30%GF, Elastomer - TPE
Water & dust resistanceIP69
Operating temperature-20 to 60°C
Storage temperature-40 to 60°C
Battery type• 3 to 8 years battery life depending on operating mode
• User replaceable batteries 5400 mAh 3.6V (Li-SoCl2)
RegulatoryCE, FCC
Electrical safetyEN-60905-1
Bluetooth 5.0Declaration ID
In flightRTCA DO 160
Sigfox certified• Sigfox multi-region verified**
• All regions class 0 certified**
User interaction
Device activationActivation with the tamper button
LED feedbackGreen & red LED feedback on the device
Management services
Diagnostics• Battery lifetime prediction
• Detailed energy consumption
• Geolocation diagnostics
• Installation
• Communication quality
Management• OTA firmware updates (over BLE and remote)
• Remote configuration
• Tracker usage profiles
• External environmental sensors
Application services
Services• Localization
• Journeys
• Activity
• Utilization
• Connected with environmental sensors
• Tilt detection
Firmware configuration
Communication service• Region switching strategy
• Data recovery strategy
• Communication conditions
• Flight detection on/off
General configuration• Rule engine configuration
• Diagnostic levels
• Boot methods
• Accurate time synchronization
Orientation serviceOrientation detection parameters
Activity serviceActivity detection parameters
Location service• Motion based,context based, periodic or scheduled
• Configurable update rate and journey detection
• Priority sequence (GPS, Wi-Fi, BLE, network)
• GPS fix parameters
• Indoor detection algo
• Wi-Fi scan strategy
• BLE scan strategy
Environmental sensing• Polling and aggregation strategy
• Alerts
• Edge processing parameters
Tamper servicePhysical tamper button at the back of the device
Encryptions• Sigfox communication AES encryption
• Device unique encryption keys
• End to end payload encryption Chacha 20
• AES encrypted firmware
• Firmware upgrade allows only signed firmware images

Specsheet and installation manual