Track 1000

SNT 3 Ultra - GNSS/WIFI/BLE - Sigfox RCx

The rugged low-power tracker with longest battery life. Indoor and outdoor localization, zone and high precision with guaranteed data recovery (patented). Compatible with multiple external environmental sensors.

Track 1000 REV2 Front Small

Sigfox Certified with integrated Data Recovery

Europe Sigfox certified with integrated data recovery
Automatic Region Switching

The tracker performs automatic GNSS or Monarch based region switching.

Full Data Recovery (Patented)

Some area’s lack perfect network coverage.  Our patented data recovery algorithm will recover this data when the device gets back to an area with sufficient coverage.


Designed for Industrial Use

Water & Dust Proof with Venting Membrane

IP68 & IP69K with automotive-grade venting membrane, IK08 & IK10, Flame retardant.

Multiple Mounting Methods

Choose the method which is most convenient: rivets, screws, magnets or tie wraps.

Serves multiple use cases

The trackers are used on a wide side of assets: trailers, containers, RTP, boxes, …


Multi-technology indoor & outdoor localization tailored for low power

4 TECHNOLOGIES 2 768x478 min
Full variety of localization technology

This tracker allows localization based on GPS, BLE, WiFi or network localization (Sigfox Atlas). The product can be delivered with all localization technologies on board.  Stripped down versions can be delivered as well.

Smart Decisions when to Localize

This tracker can be configured to localize periodically, scheduled, motion or context-based.

High Precision Localization (optional)

Requiring up to 1 meter precision? This tracker can be configured to automatically switch to high precision when in a Quuppa and BlooLoc high precision setup. Our platform does the rest.


Smart activity detection for utilization & trip extraction

Track 1100 screenshot 1024x640 min
Activity Detection

Based on acceleration the edge analysis capabilities allow to perfectly tune the activity detection patterns for your use case.

Journey/Trip Detection

The trackers allow to extract journeys of trackers between different locations so that you don’t miss a stop even if is a short one.


Extract how often and how long your asset has been utilized to optimize your fleet or roll-out pay per use models.

Context Sensing

Sense more with embedded or external sensors

sensolus tracker sensor connections
Extensible external sensors

Do you need to monitor temperature, humidity, door status or another sensor? This tracker allows to communicate with external sensors over the Bluetooth Low Energy protocol.


Measure if a box is open or closed, if a siccor lift is in use, or if a container is emptied with the built-in orientation functions.

Measuring or alert mode

When you directly need to know when a threshold is exceeded you can use our edge sensor alerts.

Virtual tamper alert

Detect when somebody is removing the tracker.

Edge Platform

Fully configure the tracker behavior to your asset type and use case

Diagnostics tab 1 1024x640 1
Configurable rule engine

This tracker allows to remotely configure the wanted behavior of your tracker in form of conditions/actions.

Configurable edge pre-processors

Each asset type and use case has optimal settings for correct analysis. Those extensive set of parameters can be remotely configured.

Extensive diagnostics

Having a lot of trackers in the field requires a solid set of diagnostics to check installation quality, follow-up battery consumption of each separate component and much more.

Over the air firmware update over BLE

Flash new firmware on the tracker using a smart phone or BLE gateway.

Commonly tracked industrial manufacturing assets


  • Always know where trailers are
  • Follow up usage and mileage
  • Know when a door is opened
  • Monitor transport conditions
  • Monitor persons inside
china top min

Returnable Transport Packaging (RTP)

  • Prevent delays in production line
  • Optimize RTP allocation and rotation
  • Know RTP’s in use
127833540 375788430159243 5335135263308911591 n 1024x685 1
Automotive tracking

Most used applications

Inventory management 1

Inventory Management

Know on every moment where your assets are.

Condition monitoring

Transport condition monitoring

Monitor important parameters like temperature and humidity during transport.

Utilization monitoring

Utilization Management

Detect and find back stolen assets.

compliance monitoring

Compliance monitoring

Detect assets in the wrong place, spending too much time on a location, ...

Invisible process flows

Process flow management

Optimize asset rotation times & detect flow anomalies.


Theft protection

Detect and find back stolen assets.

Technical documentation

download a pdf file of the technical documents you need

Product specifications

Below you’ll find a detailed list of the product specifications

Sigfox • Energy efficient tranceiver
• Internal omnidirectional antenna
• Bi-directional communication

• All regions: RC1/RC2/RC3/RC4/RC5/RC6/RC7
• Dynamic multi-region switching possible
• Data recovery (patented)
Bluetooth Low Energy (BLE) • BLE 2.4 GHz
• Bluetooth Low Energy 5.0
• OTA firmware upgrade
GNSS • u-blox 8th generation GNSS receiver for GPS
• Large patch antenna for optimum performance
BLE • Sensolus proximity beacon detection
• Detectable by zone and high precision anchors
Sigfox Atlas Wi-Fi based geolocalization (optional)
Wi-Fi Wi-Fi based geolocalization (optional)
Internal sensing • Activity monitoring
• Orientation monitoring
• Virtual tamper detection
External sensing • Temperature, humidity, air quality
• Person presence, contact, magnet
• Other BLE sensors can be added
Mounting options • Holes (7x9mm) for screws or rivets
• Cable ties
• Double sided tape
• Magnets (optional)
Mechanics & design
Antennas All antennas are internal
Size 130 x 72 x 36mm (L W H)
Weight 208 gram
Color Darkgrey
Casing · PBT/PC 29 TM-22 FRUV LS
· Flame retardant
· UV-stabilized
Water & dust resistance IP68 & IP69K
Impact resistance IK8
Operating temperature -20°C to 60°C (optional to 80°C)
Storage temperature -40°C to 85°C
Drop shock and vibration EN 60068 (not tested)
Battery type • Up to 10 years battery life depending on operating mode
• User replaceable battery pack (Li-SoCl2) 8400 mAh 3.6V
• 2,8 gram Lithium
Regulatory CE, UKCA
Electrical safety EN-60905-1
Bluetooth 5.0 Declaration ID: D059622
Sigfox certified • Sigfox multi-region verified
• All regions class 0 certified
Management services
Diagnostics • Battery lifetime prediction
• Detailed energy consumption
• Geolocation diagnostics
• Installation
• Communication quality
Management • OTA firmware updates over BLE
• Remote configuration
• Tracker usage profiles
• External environmental sensors
Application services
Services • Localization
• Journeys
• Activity
• Utilization
• Connectable with environmental sensors
• Tilt detection
User interaction
Device operation Magnetic activation
Synchronize remote settings • Instant: Magnet activation
• Periodic: No user interaction needed
LED Feedback Green & red LED feedback on the device
Firmware configuration
Communication service • Region switching strategy
• Data recovery strategy
• Communication conditions
General configuration • Rule engine configuration
• Diagnostic levels
• Boot methods
• Accurate time synchronization
Orientation service Orientation detection parameters
Activity service Activity detection parameters
Location service • Motion based,context based, periodic or scheduled
• Configurable update rate and journey detection
• Priority sequence (GPS, Wi-Fi, BLE, network)
• GPS fix parameters
• Indoor detection algo
• Wi-Fi scan strategy
• BLE scan strategy
Environmental sensing • Polling and aggregation strategy
• Alerts
• Edge processing parameters
Tamper service Virtual tamper algo configuration
Encryptions • Sigfox communication AES encryption
• Device unique encryption keys
• End to end payload encryption Chacha 20
• AES encrypted firmware
• Firmware upgrade allows only signed firmware images