The medium-size long-life battery-powered full-fledged GPS, WIFI and BLE tracker with tamper alert. This tracker is in-flight certified.
The tracker performs automatic GNSS or Monarch based region switching.
Some area’s lack perfect network coverage. Our patented data recovery algorithm will recover this data when the device gets back to an area with sufficient coverage.
This tracker automatically detects when it is in flight based on acceleration and barometric pressure. When in flight all communication is switched of. Data recorded during flight is recovered after landing with our data recovery algorithm.
Get notified when the tracker is removed
IP69 water and dust proof.
Choose the method which is most convenient: rivets, screws or tie wraps.
The trackers are used on a wide side of assets: trailers, containers, RTP, boxes, …
This tracker allows localization based on GPS, BLE, WiFi or network localization (Sigfox Atlas). The product can be delivered with all localization technologies on board. Stripped down versions can be delivered as well.
This tracker can be configured to localize periodically, scheduled, motion or context-based.
Requiring up to 1 meter precision? This tracker can be configured to automatically switch to high precision when in a Quuppa and BlooLoc high precision setup. Our platform does the rest.
Based on acceleration the edge analysis capabilities allow to perfectly tune the activity detection patterns for your use case.
The trackers allow to extract journeys of trackers between different locations so that you don’t miss a stop even it is a short one.
Extract how often and how long your asset has been utilized to optimize your fleet or roll-out pay per use models.
Do you need to monitor temperature, humidity, door status or another sensor? This tracker allows to communicate with external sensors over the Bluetooth Low Energy protocol.
Measure if a box is open or closed, if a siccor lift is in use, or if a container is emptied with the built-in orientation functions.
If you need to know immediately when a threshold is exceeded, you can use our edge sensor alerts.
Detect when somebody is removing the tracker with the tamper button on the back of the tracker
This tracker allows to remotely configure the wanted behavior of your tracker in form of conditions/actions.
Each asset type and use case has optimal settings for correct analysis. Those extensive set of parameters can be remotely configured.
Having a lot of trackers in the field requires a solid set of diagnostics to check installation quality, follow-up battery consumption of each separate component and much more.
Flash new firmware on the tracker using a smart phone or BLE gateway.
Know at every moment where your assets are.
Monitor important parameters like temperature and humidity during transport.
Detect and find back stolen assets.
Detect assets in the wrong place, spending too much time on a location, ...
Optimize asset rotation times & detect flow anomalies.
Detect and find back stolen assets.
download a pdf file of the technical documents you need
Below you’ll find a detailed list of the product specifications
| Connectivity | |
|---|---|
| Sigfox |
• Energy efficient tranceiver • Internal omnidirectional antenna • Bi-directional communication • All regions: RC1/RC2/RC3/RC4/RC5/RC6/RC7 • Dynamic multi region switching possible • Data recovery (patented) |
| Bluetooth Low Energy (BLE) |
• BLE 2.4 GHz • Bluetooth Low Energy 5.0 • OTA firmware upgrade |
| Geolocalization | |||
|---|---|---|---|
| GNSS |
• u-blox 8th generation GNSS receiver for GPS • Large patch antenna for optimum performance |
||
| BLE |
• Sensolus proximity beacon detection • Detectable by zone and high precision anchors |
||
| Sigfox Atlas | Network based geolocalization | ||
| Wi-Fi | Wi-Fi based geolocalization (optional) | ||
| Sensing | |
|---|---|
| Internal sensing |
• Activity monitoring • Orientation monitoring • In-flight monitoring • Virtual tamper detection |
| External sensing |
• Temperature, humidity, air quality • Person presence, contact, magnet • Other BLE sensors can be added |
| Mounting | |
|---|---|
| Mounting options | • Holes (top: ∅5 mm, bottom 5*6 mm ) for screws or rivets |
| Mechanics & design | |
|---|---|
| Antennas | All antennas are internal |
| Size | 175 x 55 x 28mm |
| Weight | 135 gram |
| Color | Translucent black |
| Casing | Panel – PBT 30%GF, Cover – PP 30%GF, Elastomer - TPE |
| Water & dust resistance | IP69 |
| Impact resistance | IK07 |
| Operating temperature | -20°C to 60°C |
| Storage temperature | -40°C to 60°C |
| Battery | |
|---|---|
| Battery type |
• 3 to 8 years of battery life depending on operating mode • User replaceable batteries 5400 mAH 3.6C (Li-SoCl2) • 1,78 gram lithium |
| Certifications | |
|---|---|
| Regulatory | CE, FCC** |
| Electrical safety | EN-60905-1** |
| Bluetooth 5.0 | Declaration ID** |
| Sigfox certified |
• Sigfox multi-region verified** • All regions class 0 certified** |
| In flight | RTCA DO 160 |
| ** Certificates in progress | |
| User interaction | |
|---|---|
| Device activation | Activation with the tamper button |
| LED feedback | Green & red LED feedback on the device |
| Management services | |
|---|---|
| Diagnostics |
• Battery lifetime prediction • Detailed energy consumption • Geolocation diagnostics • Installation • Communication quality |
| Management |
• OTA firmware updates (over BLE and remote) • Remote configuration • Tracker usage profiles • External environmental sensors |
| Application services | |
|---|---|
| Services |
• Localization • Journeys • Activity • Utilization • Connectable with environmental sensors • Tilt detection |
| Firmware configuration | |
|---|---|
| Communication service |
• Region switching strategy • Data recovery strategy • Flight detection on/off • Communication conditions |
| General configuration |
• Rule engine configuration • Diagnostic levels • Boot methods • Accurate time synchronization |
| Orientation service | Orientation detection parameters |
| Activity service | Activity detection parameters |
| Location service |
• Motion based, context based, periodic or scheduled • Configurable update rate and journey detection • Priority sequence (GPS, Wi-Fi, BLE, network) • GPS fix parameters • Indoor detection algo • Wi-Fi scan strategy • BLE scan strategy |
| Environmental sensing |
• Polling and aggregation strategy • Alerts • Edge processing parameters |
| Tamper service | Physical tamper button at the back of the device |
| Security | |
|---|---|
| Encryptions |
• Sigfox communication AES encryption • Device unique encryption keys • End to end payload encryption Chacha 20 • AES encrypted firmware • Firmware upgrade allows only signed firmware images |
