Asset trackers
Beacon trackers
A variety of ways to track our beacon trackers
Beacon trackers require 3rd parties for localisation and communicating their position and sensor values to the internet. We provide several ways to do this.
Tracking at dedicated places
Tracking tags can be localised at dedicated zones using fixed BLE anchors. Assets equipped with tracking tags can also use real-time zone scanning and high-precision infrastructure. This means connected trackers and tracking tags can be tracked using the same infrastructure.
In-transit tracking
Tracking tags can be localised in transit by the Sensolus NB-IoT / LTE-M trackers. They scan for nearby tags and send their information to the cloud platform.
When there are no trackers nearby, the tags are temporarily ‘invisible’.
Combining tags and connected trackers
Customers with a lot of Sensolus connected trackers on their sites or in their flows can use them to communicate the location of the tracking tags attached to low-cost assets.
Nomadic tracking
Smartphones or tablets are often used within work processes. These mobile devices can be used as for zone scanning which extends localisation and communication without fixed infrastructure.
Key characteristics
Gateway based communication
Detected by a gateway (fixed, mobile, etc.)
Extreme battery life
Depending on use case
Multiple form factors
Puck, card
Industrial strength
IP68, IP69, IK10, UV stabilised
Very cost effective
Most cost effective solution
Inferred location
Location inferred through gateway
Additional sensor
Variants with extra sensors available
Edge intelligence Logic on the sensor ensures it is aligned to the use case
Self-install mounting options
Screws, straps, tape
Self-install in less than a minute
